Make your own free website on Tripod.com

Paintball

Model 98 tech

Paintball Main
News
Practice
Links
Autococker Tech
Anti-Fog
Gun test
Model 98 Tech
Services

Tech question will surely be answered here

Field Stripping your 98

In this section I will put diagrams and very distinct instructions on how to field strip, clean, oil, and maintain your gun in perfect condition.

 

I will list the steps 1 by 1 showing the best possible example for everything you will need to do.

 

~Things you will need~

Allen wrenches

                                                              Beach towel (make sure its a different color than black or grey)

Steel wool

Gun Oil/Lube

Clean paper towels

 

 

 

*Note- Before doing any field stripping you have to remove you CO2 and your barrel.  You must also make sure that the gun is not cocked(parts will fly everywhere)

Also make sure to take off the rubber thing on your cocking rod so you can disassemble it.

 

 

STEP #1
1.jpg

1.  Set gun on towel so that the barrel faces your left hand, and then begin to remove      all of the Allen screws (not the ones holding on the grip). 

STEP #2
2.jpg

  1. Then carefully remove the receivers (the two metal halves that protects your guns internals) and in doing so make sure you push down the rear nob so that it rests in the lower half

STEP #3
14.jpg

  1. Take out the linkage arm and polish with steel wool

STEP #4
15.jpg

16.jpg

4.  Oil your linkage arm and then put it back together in gun then oil it it gun.

STEP #5
18.jpg

19.jpg

5.  Oil your bolt and all o-rings

STEP #6
1.jpg

6.  Put receiver back together (make sure you put the larger screw in fore-grip area)

Parts Diagrams

Listed here are the parts in you Custom 98
20.jpg

If you have any further questions feel free to email me at masonmurphy@msn.com or call me at 541-276-3599
~I also will install any new products for you or do any repairing your gun needs (for price check e-mail me)